GPS 3026- V700 for recoating prefinished Steel Cladding

This specification provides exceptional UV resistance and long term durability. Vitreflon 700 features very quick air dry times, and as a result, has minimal overspray. It provides a hard wearing surface and an excellent appearance. It is available in any colour, and gloss or satin finish. This spec is ideal in areas of high or extreme UV exposure.

Surface Preparation:

Clean in accordance with AS1627.1 to remove all degreasing products, grease, dirt, salts and other contaminants and lightly abrade.


Apply in two coats wet-on-wet Vitreflon 700 Topcoat to a minimum dry film thickness of 50 microns.

The coverage rate is 6m2 per litre.


Colorbond Cladding and other prefinished steel cladding


VITREFLON 700 is a unique two pack fluoropolymer resin base top coat that  can  cure  at  room  temperature  or  under  low  bake  conditions.  Vitreflon  700  gives  excellent  UV  resistance  and weathering performance and has very good application properties. This ‘State of the Art’ technology lowers the lifetime maintenance cost of coatings in a variety of environments.

« Browse more products