GPS 1262A V580, V630 for Galvanized Steel Coating In C3 Env. 2 – 5 Years

Surface Preparation:

 Preliminary cleaning:

Thoroughly degrease the surface to remove all contaminants as per AS 1627.1

Brush (sweep) Blast Clean as per Std. AS 1627.4 Appendix D, or if not possible hand abrade thoroughly to achieve a surface profile of 10 -15 microns.


1. Apply Vitrephos 580 Epoxy Primer to achieve 75 um DFT

2. Apply Vitrethane 630 Polyurethane topcoat to achieve 75μm DFT


  • Industrial roller shutters
  • Steelwork
  • Suitable for toys and playground equipment in accordance with AS1924.1
  • Truck bodies
  • Machinery


 VITREPHOS 580 combines a high loading of zinc phosphate in an air impermeable matrix of hard epoxy resin. Its excellent adhesion  renders VITREPHOS 580 very effective for galvanized steel substrates. It usually forms the primer or intermediate coat  in combination with a durable VITRETHANE Polyurethane topcoat finish.

 VITRETHANE 630 is a solvent based two pack acrylic urethane with very good exterior durability and excellent application properties. It is quick drying and well suited to onsite application.

« Browse more products