GPS 1242C V580, V416 MIOX, V790 for Mild Steel Coating in C3 Env. 10 – 15 Years

Surface Preparation:

Thoroughly degrease the surface to remove all contaminants as per AS 1627.1

All sharp edges are to be removed by grinding to provide a 2mm minimum radiused edge.

Abrasive Blast Clean to AS 1627.4 class 2.5



1. Apply Vitrephos 580 Epoxy Primer to achieve 75 um DFT

2. Apply Vitreset 416 MIOX Buildcoat to achieve 125um DFT

3. Apply Vitreflon 790 Fluoropolymer topcoat to achieve 50μm DFT


  • Factories/Warehouses
  • Pulp and paper plants
  • Chemical plants
  • Tank exteriors
  • Food processing plants and abattoirs
  • Effluent Water treatment plants
  • Bridges and Marine Environments
  • Aircraft hangars


VITREPHOS 580 combines a high loading of zinc phosphate in an air impermeable matrix of hard epoxy resin. Its excellent adhesion and its corrosion inhibiting “throw” renders VITREPHOS 580 very effective in the control of rust on mild steel substrates. It usually forms the primer or intermediate coat of a heavy duty paint system in combination with a durable VITRETHANE Polyurethane topcoat finish.

VITRESET 416 MIOX is a high performance epoxy intermediate / base coat that gives excellent adhesion and corrosion barrier properties. Micaceous Iron Oxide coatings are renowned for their ability to stand the test of time, and withstand both moisture ingress and substrate movement to ensure long-term asset protection.

VITREFLON 790 is a high performance two pack fluoropolymer resin base top coat that can cure at room temperature or under low bake conditions. This gives excellent UV resistance and weathering performance. It has good application properties and chemical resistance. The ‘State of the Art’ technology lowers the lifetime maintenance cost of coating in a variety of environments.

« Browse more products