GPS 2121 – V410 Coloured Internal Concrete Coating

This spec is a heavy duty concrete protection system that is suitable in moderate to severe internal environments. It may be applied with roller and brush or airless spray. It provides a hard wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and comes with a gloss finish.

 Surface Preparation:

Thoroughly “key” and clean surface to be coated. Suitable preparation methods include acid washing and diamond grinding

1st Coat – apply Vitreset 410 thinned 10% with V122 Epoxy Thinners to a minimum dry film thickness of 150 microns. Allow overnight dry.

The coverage rate is 5-7m² per litre

2nd Coat – apply Vitreset 410 Heavy Duty Topcoat to a minimum dry film thickness of 150 microns. Rough floors or extra high wear areas will benefit with a higher build.

The coverage rate is 5-7m² per litre

Applications

Concrete floors in factories, warehouses, jails, washroom floors and walls, shopping centre’s, etc. where odour during application isn’t an issue and a heavy duty non slip floor is needed.

Products

  • Vitreset 410 Two Pack High Build Epoxy Coating
  •  V122 Epoxy Thinners (for thinning 1st coat)

« Browse more products