1800 819 585
Contact Us
for any quotes or enquiries

GPS 1223C E2300, E2100MIOX, E9000 for Galvanized Steel Coating in C4 Env. 10 – 15 Years

Preliminary cleaning:

Thoroughly degrease the surface to remove all contaminants as per AS 1627.1

Brush (sweep) Blast Clean as per Std. AS 1627.4 Appendix D, or if not possible hand abrade thoroughly to achieve a surface profile of 10 – 15 microns.


1. Apply first Coat of Envirothane 2300 Anti Corrosive Primer to achieve 75 um DFT

2. Apply two coats of Envirothane 2100 MIOX wet on wet to achieve 250 um DFT

3. Apply 1-2 coats of Enviroflon 9000 W/B Fluoropolymer topcoat to achieve 50μm DFT


  • Fascias and facades
  • Wind turbines
  • High capital cost structures
  • Bridges and acoustic barriers
  • Chemical plants
  • Structural steel and roofing
  • Other uses include coating of substrates such as copper, aluminium and glass.

E9000 is suitable practically wherever good chemical resistance with excellent durability and aesthetic appearance is required.



ENVIROPHOS 2300 is a water based, environmentally friendly two pack zinc phosphate primer for mild steel, hot dipped gal and zinc plated steel. This product exhibits excellent anti-corrosive properties, is fast drying and has very good resistance to abrasion and impact damage. E2300 commonly forms the primer or intermediate coat in medium to heavy duty coating specifications, in conjunction with an ENVIROTHANE Topcoat.

ENVIROSET 2100 MIOX is a two component high performance epoxy Micaceous iron oxide coating. When used as an intermediate coat it provides an excellent corrosion barrier. Fast dry characteristics are especially beneficial for early handling when applied as a same day multicoat system, even under low temperature conditions. The high solids and low VOC nature is ideal for both industrial and marine environments.Enviroset 2100 has been formulated to suit both spray or brush applications.

 ENVIROFLON 9000 is a unique, environmentally friendly two pack water borne fluoropolymer based topcoat which gives excellent UV resistance and weathering performance. It has good application properties and chemical resistance. This ‘State of Art’ technology lowers the lifetime maintenance cost of coating in a variety of environments.