GPS 1116- E2000, E8476 Clear External Concrete Coating

This spec achieves a beautiful hardwearing ‘polished concrete’ look at a fraction of the cost and application time of the traditional process. It uses Envirothane 2000 Super Clear Two Pack Epoxy and either Envirothane 8476 Clear Gloss or Satin Polyurethane. Its protective polyurethane topcoat provides an ideal external application. This system provides a hard wearing surface, easy cleaning properties, an excellent appearance, and very good UV resistance. It can be used as a food grade coating, and lends itself to being applied as a non-slip surface.

 Surface Preparation:

Provide a clean, dry, etched surface. If ‘polished concrete’ look is required, carefully grind the surface being treated using a diamond floor grinding machine. Concrete must be suitably keyed to ensure good coating adhesion. If the surface is acid etched, it is absolutely essential that all acid residue is removed, or blistering of the applied coating will occur.

Application:

1st Coat – apply by roller or spray a consistent, continuous coat of E2000 to a minimum dry film thickness of 50 microns. The coverage rate is 7-10m2 per litre.

2nd Coat – apply by roller or spray a consistent, continuous coat of E8476 to a minimum dry film thickness of 50 microns. Rough floors or extra high wear areas will benefit with a higher build applied over two coats. The coverage rate is 7-8m2 per litre.

 If E8476 Satin is used, care must be taken to ensure the film is even.

Applications

Schools, food prep areas, lobbies and showrooms, external walkways.

Products

1. Enviroset 2000 Super Clear Two Pack Epoxy Sealer

2. Envirothane 8476 Clear Gloss or Satin Two Pack Polyurethane

« Browse more products